Refer to the Unifying section in this guide for more information (p. Use the Unifying software to reset the connection between the keyboard/mouse and Unifying receiver. The keyboard Status LEDs should light up.ĥ. Is the keyboard turned on? Slide the keyboard Off/On switch to the On position. Move closer? Try moving the keyboard closer to the Unifying receiver, or plug the Unifying receiver into the receiver extender cable to bring it closer to the keyboard.Ĥ. For more information and to download the software, visit *Go to Start / All Programs / Logitech / Unifying / Logitech Unifying Softwareġ. Just start the Logitech® Unifying software* and follow the onscreen instructions. Now add a compatible wireless keyboard or mouse that uses the same receiver. You’ve got a Logitech® Unifying receiver. Heavy usage usually results in shorter battery life.
* Battery life varies with usage, backlighting level, and computing conditions. A full battery recharge takes about 5 hours and only 3 hours if the keyboard has been switched off. To recharge the keyboard, connect it to your computer using the USB recharging cable. Typically, you can expect about 10 days of battery life before you will need to recharge the keyboard battery.* If the backlighting level is set to 100%, you have about 15 hours of battery life. After three hours of inactivity or if the keyboard is restarted, the backlighting level returns to automatic adjustment. More battery power is used as the level of illumination is increased.
There are fi ve levels of illumination: 0%, 25%, 50%, 75%, and 100%. Press FN + F5 to decrease backlighting and FN + F6 to increase it. When keyboard battery power is very low, the lower battery LED blinks red and backlighting is switched off to conserve battery life. There is a proximity sensor in the keyboard that detects motion and switches on backlighting.īacklighting remains on while you charge the keyboard. To activate backlighting, move your hand over the keyboard, or press a key.
0 kommentar(er)
